Fasteners
14g x 65mm with 26mm EPDM Washer
- Pre-assembled translucent sheeting fasteners.
- No pre drilling required. Built in cutting device oversizes the roof sheet penetration, eliminating the requirement to
pre-drill an expansion hole.
- Suitable for fastening all fibreglass, polycarbonate and PVC roofing to timber and thin metal purlins.
- Fully compliant with AS3566.
_______________________________________________________________________________________________________
14g x 50mm with 26mm EPDM Washer
- Pre-assembled translucent sheeting fasteners.
- No pre drilling required. Built in cutting device oversizes the roof sheet penetration, eliminating the requirement to
pre-drill an expansion hole.
- Suitable for fastening all fibreglass, polycarbonate and PVC roofing to timber and thin metal purlins.
- Fully compliant with AS3566.
_______________________________________________________________________________________________________
12g x 65mm with 32mm Weatherlock
- Suitable for use on Custom Glaze polycarbonate roofing.
- Pre-assembled translucent sheeting fasteners.
- Suitable for fastening all fibreglass, polycarbonate and PVC roofing to timber and thin metal purlins.
- Class 4. Fully compliant with AS3566 and the NZMRM code of practice.
_______________________________________________________________________________________________________
12g x 65mm Timbertite with 21mm Washer
- Suitable for polycarbonate, fibreglass and PVC roofing.
- Class 4. Fully compliant with AS3566 and the NZMRM Code of Practice.
_______________________________________________________________________________________________________
12g x 55mm Timbertite with 21mm Washer
- Suitable for polycarbonate, fibreglass and PVC roofing.
- Class 4. Fully compliant with AS3566 and the NZMRM Code of Practice.
_______________________________________________________________________________________________________
Laserlite® One Shot pre-drills a 12mm oversized hole to allow for sheet expansion with its unique blade cutter in one step, saving you up to 50% installation time. No more pre-drilling required.
- Prevents your polycarbonate buckling due to changes in temperature, by cutting an oversized hole in one action.
- Saves 50% installation time
- Unique blade cuts an oversized hole in the Laserlite® polycarbonate, and its strengthened tip drills through the steel or timber batten all in one action, No more pre-drilling required.
- No extra expense of specialist tools.
Professional finish
Automatically centres the oversized holes to allow the sheet to expand and contract in both directions equally, for the most professional finish.
Watch how easy it is to install
_______________________________________________________________________________________________________
Flashings
Flashings are designed to prevent wind and rain entering gable ends, as well as to prevent leaking at the roof apex, walls and fascias.
Polycarbonate Flashing Information