Custom GlazeTM is a high quality polycarbonate roofing product that is engineered to withstand longterm outdoor UV exposure. With a 25 year Lifetime Warranty* and a 15 year Loss of Light Warranty*, 99.9% UV protection and exceptional product specifications, Custom Glaze will meet the requirements of designers looking for a modern look to enhance and protect an outdoor area.
Product Specifications
Custom Glaze has a thickness of 1.2mm and is available in the following standard Lengths:
1.8m, 2.1m, 2.4m, 2.7m, 3.0m, 3.6m, 4.2m, 4.8m, 5.4m and 7.2m.
Alsynite will cut any standard length to a specific length to suit your project *.
| Colour |
Clear |
Bronze Tint |
 |
 |
 |
| Light Transmission |
93% |
38% |
| Heat Reduction |
0% |
33% |
Custom Glaze Profile
| 1 |
2 |
3 |
4 |
5 (Span) |
| 30mm |
65mm |
370mm |
20mm |
870mm |
Installation Information
Alsynite recommends that the minimum roof pitch for Custom Glaze installations is five degrees. It is designed to be installed on purlins at a maximum of 1000mm centres. However, if it is being installed in a snow prone area, Alsyntie recommend that purlin spans are reduced to a maximum of 600mm centres.
Fasteners: Alsynite branded Class 4 , 12g x 65mm fastener with a 32mm Weatherlock. Custom Glaze must be fixed on every crest of every purlin. Pre-drill a 10mm oversize hole to ensure the sheet has room to expand and contract. You will need 6 fasteners per lineal metre.
Flashings: Depending on your roof design, you may need a polycarbonate barge capping (flashing) and a metal back channel flashing. You can get both of these from Alsynite.
Recommended Accessories: Depending on your roof design you might also need Alsynite Noise Stop Tape and Back Channel Infill Strip. For more information on these visit our accessories page.
Product Information
Disclaimer: Due to your monitor settings we cannot guarantee that the colour you see on your screen
is the exact colour of the product. Please contact us for accurate samples.
* Custom Glaze can be cut to any lenght (up to 7.2m) If you require a sheet length that is not standard, you will need to purchase the next standard length of sheet. Eg if you require a length of 2.3m, you will need to purchase a 2.4m length sheet. Please contact Alsynite for more information.
Custom Glaze is a Trademark of Alsynite NZ Ltd.