Mighty-Tite Fasteners

The time saving fixing system

Save pre-drilling time with Alsynite One Mighty-Tites. Alsynite One Mighty-Tite Polycarbonate Fastener pre-drills a 12mm nominal oversized hole to allow for sheet expansion with its unique blade cutter in one step saving you up to 50% installation time. No more pre-drilling required.

Technical specifications

Alsynite One Mighty-Tite Polycarbonate Fastener pre-drills a 12mm nominal oversized hole to allow for sheet expansion with its unique blade cutter in one step saving you up to 50% installation time. No more pre-drilling required.

The unique blade cuts an oversized hole in the Polycarbonate sheeting, preventing the sheeting buckling due to changes in temperature.

Mighty-Tites strengthened tip drills through the steel or timber batten all in one action. No more pre-drilling required.

No more pre-drilling means installation is faster and easier. No extra expense of specialist tools. No extra effort changing tools.

Mighty-Tite fastener is automatically centred in the oversized hole for a professional finish.

Mighty-Tite fasteners are mechanically plated to comply with AS 3566 Class 4.

Installation of Polycarbonate Roofing with Alsynite One Mighty-Tite fixings

NOTE: For installation of roofs over 3m in height or for cyclonic regions, contact your nearest Alsynite One NZ Ltd office for special instructions. Refer to installation guidelines available at www.alsynite.co.nz
CAUTION: Always exercise extreme care when working on a roof. Use walking boards along purlins or battens. Never walk directly on the sheeting. Always wear safety glasses or goggles when operating cutting tools or drills

Product downloads

Mighty tite installation diagram

While stock last

 

Product Showcase


If you have any queries, please contact your nearest Alsynite sales office.